| Customization: | Available |
|---|---|
| Type: | UV IR Flame Detector |
| Usage: | UV 3IR Flame Detector |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| S600 Flame Detector | |
| Detection principle | infrared/ ultraviolet light; |
| Wavelength range | infrared 2.2μm 3.8μm 4.4μm 5.3μm ultraviolet 185~260nmUV; |
| Sensitivity | Level 1; |
| Response time | <30s; |
| Power-on warm-up time | 60s; |
| Flame detection delay | 3S; |
| Ambient temperature | -10ºC~55ºC; (The maximum surface temperature of the shell shall not exceed 80°C;) |
| Relative humidity | <93%RH; |
| Explosion-proof method | explosion-proof type; |
| Explosion-proof level | Ex dIIC T6 Gb; |
| Protection level | IP66; |
| Power supply | DC24V±10%; |
| Indicator light | preheating yellow is always on, normal green is always on, pre-warning red is flashing, and alarm red is always on; |
| Output signal | 1 set of switching value, RS485, 4-20mA; (any two signal combination output) |
| Power consumption | ≤1W; |
| Use cable | ≥1.5mm2; |
| Maximum distance between detector and host | ≤800m; |
| Whole machine weight | ≤1200g; |
| Overall dimensions | 145×141×113 (mm); |
| Pressure limit | 86KPa~106KPa; |
| Usage location | Used in hazardous locations with explosive combustible gas levels IIA~IIC and temperature groups T1~T6. |
Q1: Are you a trading company or Manufacturer ?
){kind=link}