| Customization: | Available |
|---|---|
| After-sales Service: | Yes 24 Hours Online Service |
| Warranty: | 1 Year |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
S100 fixed type explosive gas detector can satisfy the sound and light alarm prompt in gas detection field, and real-time display the field gas concentration. The debugging adopts infrared remote control, and the parameters can be set without opening the cover.
Our Model S100 fixed type gas detector can transform the leakage gas concentration signal in air into electrical signal for long-distance transmission. The instrument can adopt two-wire system RS3082, three-wire system 4-20mA or four-bus RS485 output mode, which has the advantages of long transmission distance and anti-interference. The instrument can be wireless transmission and can be used independently.
| S100 Fixed Type Explosive Gas Detector | |
| Detection principle | Catalytic/electrochemical/semiconductor/infrared |
| Gas detected | Combustible gas, toxic gas |
| Sampling mode | Natural diffusion |
| Detection range | (0~100%)LEL;0-****PPM |
| Resolution ratio | 1%LEL;1PPM/0.1PPM |
| Measurement error | Full Scale ±3%LEL |
| Status indication | LCD, LED |
| Debugging mode | Controller |
| Response time | <15s |
| Recovery time | <30s |
| Environment temperature | (-40~70)ºC |
| Power | DC24V/36V ±10% |
| Output signal | 4~20mA or RS485 |
| Power consumption | ≤3W |
| Relative humidity | <95% |
| Explosive proof mode | Flame-proof type |
| Explosion proof grade | Exd ii C T6 Gb |
| Explosion proof number | CNEx16.2871 |
| Ingress protection | IP66 |
| Maximum distance between detector and host | ≤1000m |
| Weight | ≤1500g |
| Measurement number | No. 2016C242-41 |
| Size | (18.5×18×8)cm |
Q1: Are you a trading company or Manufacturer ?
){kind=link}